Electronic Centrifugal Switch Application Guide

The setting of motor disconnection speed point
1. Only need to connect the wire to work, no need to read any parameters of the motor;
2. Please make sure that the circuit connection of the electronic centrifugal switch is correct before the first power-on, please refer to the wiring diagram of the corresponding electronic centrifugal switch above for details;
3. Make sure that the motor is rated voltage and rated frequency, and meets the voltage range of the selected electronic centrifugal switch;
4. Make sure that the load of the motor is no-load, and make sure that the voltage drop when the motor starts does not exceed 5% (preferably a high-power variable frequency power supply);
5. Turn on the power and let the motor run for 5 seconds to complete the installation (that is, the electronic centrifugal switch will automatically read the electrical parameters of the motor and set the motor's disconnection speed point to about 75%,
And keep it for a long time), it is normal for the phenomenon of large motor vibration during installation, please do not power off;
6. After completing the above setting process, power off the motor, then the motor can be used normally and a performance test can be done

Features
Small Package
Long Life(1M cycle)
General Switch,
Auto-Match different Motor
Wide Voltage Range 115V(90V-137V) 230V(198V-264V)
50Hz/60Hz applicable
Neither switching noise nor trembling of contacts
High compatibility with general-purpose motors as well as application-specific motors
Easy installation and maintenance, mounted on inside/outside standard motor frames
Sealed with epoxy resin or silicon rub, insensitive to dirt, dust, moisture, and vibration
Discharges starting capacitors
ROHS/CE/UL